2017 Subaru Outback Tires in Greeley, CO

That schedule settles the interval for this vehicle. Regular checks can identify uneven wear before it becomes more noticeable. An inspection is also appropriate when driving conditions or tire wear make the normal service rhythm less suitable.

• Manufacturer schedule: inspect and rotate wheels and tires every 6,000 miles.
• Rotation helps distribute wear among all four tires.
• A service visit can include tread measurement and pressure adjustment.

The inspection compares wear from corner to corner and can identify an uneven pattern. The rotation used depends on the all-wheel-drive system and the tires fitted to the vehicle. A recommendation for rotation or replacement follows what the inspection finds.

• All four tires are checked for tread condition.
• Tires are rotated according to the applicable manufacturer specification.
• The monitoring system is reset after pressure is set.

Directional tread can limit how a tire moves from one side to the other, while staggered fitments can affect whether front and rear tires can exchange positions. For that reason, the correct pattern is determined during service from the vehicle’s drivetrain and the tires actually fitted. The pattern should follow the manufacturer’s specification for the vehicle.

• All-wheel drive makes similar tread depth across all four tires important.
• Directional tires may restrict cross-side movement.
• Staggered fitments can restrict front-to-rear movement.

Because this vehicle has all-wheel drive, a mismatched tread depth can load the driveline as the system responds to differences between the tires. An inspection can compare the four tires and determine whether replacement of one, more than one, or all four is the appropriate recommendation. The vehicle’s tire condition and service history determine the answer.

• All-wheel drive makes tread-depth consistency important.
• Uneven wear should be measured across all four tires.
• Replacement advice should follow an inspection of the fitted tires.

Vibration at highway speed is another reason to schedule an inspection, although the cause should be confirmed rather than assumed. Measuring tread depth on all four tires provides a direct comparison. On this all-wheel-drive vehicle, the recommendation also considers how closely the tires match one another.

• Look for a tread-wear indicator level with the surrounding tread.
• Use a penny test as a general check of tread condition.
• Have vibration or uneven wear evaluated by a service professional.

The dealership is at 4720 W 24th St in Greeley, Colorado. Booking gets the tread depth measured on all four tires and a rotation or replacement recommendation based on what the inspection finds. You can also review current service specials before scheduling.

• Online scheduler: appointment booking is available through the service page.
• Phone: call 970-373-0692.
• Address: 4720 W 24th St, Greeley, CO 80634.