2013 Subaru BRZ Alignment: Specs & Service

The manufacturer maintenance schedule does not specify an alignment interval for this model year. Alignment is best treated as a condition-based service, especially when steering or tire-wear symptoms appear. Measuring the angles can confirm whether adjustment is needed before paying for one.

• Schedule an inspection after suspension or steering component replacement.
• Have the angles checked after a significant pothole impact.
• Use uneven tire wear or pulling as reasons to measure alignment sooner.

These symptoms can indicate that camber, caster, or toe has moved outside the manufacturer’s specification. A four-wheel measurement helps separate an alignment concern from a worn steering or suspension component. Vibration at speed can also be a reason to request an inspection, although it may have more than one possible cause.

• The vehicle pulls on a flat, straight road.
• The steering wheel sits crooked while driving straight.
• Tire tread wears faster on one side than the other.

The service begins with an inspection of the tires, steering, and suspension for wear that could prevent the alignment from holding. Current angles are measured before adjustment, and the technician identifies whether correction is appropriate. Booking the measurement gives you information about the BRZ’s actual alignment condition before an adjustment is performed.

• Camber, caster, and toe measurement on all four wheels.
• Adjustment toward factory specification where possible.
• Inspection for tire, steering, and suspension wear.

An alignment measures wheel angles, but it cannot correct a loose or damaged component. Mike Shaw Subaru Greeley checks steering and suspension parts that could affect the readings or cause the BRZ to drift again. You receive a clearer repair path when the underlying condition is identified before alignment work.

• Inspect tie rods and other steering connections for wear.
• Check ball joints and struts for conditions affecting alignment.
• Review whether the suspension can hold the requested adjustment.

It becomes more worthwhile after a major pothole impact, suspension work, or a new symptom. A measurement can establish whether the current camber, caster, and toe remain within the manufacturer’s specification. That information helps avoid paying for an adjustment when the angles do not require correction.

• Check the steering wheel position while driving straight.
• Look for uneven wear across the tire tread.
• Request measurement after a significant road impact or component replacement.

This approach helps identify whether the BRZ needs an alignment or whether a steering, suspension, or tire condition should be addressed first. The service includes inspection of components that could hold the wheels out of specification. To arrange an appointment, use the service scheduler or contact Mike Shaw Subaru Greeley.

• Compare current camber, caster, and toe with factory specifications.
• Identify wear that could affect alignment results.
• Determine whether adjustment is needed before paying for one.

Next, all four wheel positions are measured for camber, caster, and toe. Where the suspension allows adjustment, the angles are brought back toward the manufacturer’s specification. This process focuses on the actual readings rather than assuming an adjustment is necessary. It also helps distinguish a correctable alignment condition from a component problem.

The service information supplied for this vehicle does not include alignment warranty terms. Booking an appointment lets the technician measure the current angles and explain the next step. Schedule service with Mike Shaw Subaru Greeley at 970-373-0692.

The 2013 Subaru BRZ uses rear-wheel drive and a lightweight coupe layout, so consistent wheel angles support predictable steering response. The service measures all four wheels and checks tires, steering, and suspension components that may affect the result. Because the manufacturer maintenance schedule does not specify an alignment interval for this model year, condition-based measurement is the appropriate way to decide whether adjustment is needed.

For directions or appointment information, call 970-373-0692 or visit Mike Shaw Subaru Greeley at 4720 W 24th St, Greeley, CO 80634. You can also use the service appointment scheduler.

The technician compares the readings with the manufacturer’s factory specifications and adjusts the angles where the suspension allows. Front and rear readings are considered independently rather than treating the vehicle as a single axle. Tires, steering connections, and suspension components are inspected first because worn parts can create inaccurate readings or prevent the alignment from holding.

The available service information does not identify a specific alignment interval for this model year, so symptoms, road impacts, and suspension work are useful reasons to request a measurement. Bring your 2013 Subaru BRZ to Mike Shaw Subaru Greeley in Greeley for a factory-spec alignment — schedule service.